Dream Light offer the single color running water light.
Red: 12V positive pole (VCC)
White :12V negative (GND)
Green: signal line (DATA) the two extra lines are backup power lines, red :12V positive pole/white :12V negative pole
Waterproof grade: IP20 bare board: the lamp beads exposed outside are not waterproof (there is double-sided tape on the back);
IP65 glue drop: the lamp bead is covered with high transparent resin to prevent a small amount of water splash (double-sided glue on the back)
IP67 casing: use silicone casing with good light transmission and outdoor rain protection (non-double-sided adhesive on the back) packaging: anti-static bag, naked version, double-sided adhesive on the back of drip adhesive, non-double-sided adhesive on the casing;
Main features:
An IC chip controls an LED bead to form a loop. The controller controls the circuit above the FPCB circuit board through the IC chip to achieve different LED effects: chase, running, running, discoloration, breathing, flash, clockwise running, counterclockwise running, simulating lightning, etc. Cutting and welding are convenient and free: each LED can be formed into a loop, which can be cut off and welded to meet the customer’s requirements of various length of lamp strip
Control Description
Running Water Control:
Flow control, running after the constant light bar
Backflow Control:
Reflux controller, switch on the signal after the light strip running constant, disconnect the trigger after the light strip flowing back, the effect is more cool.